The Elevated Black Metal Firewood Rack is a raised metal log holder for fireplaces, living rooms, cabins, garages, and covered hearth areas. Its lifted frame separates the wood stack from the floor, making the hearth area easier to sweep while giving the stored logs a cleaner visual base.

Built from powder-coated galvanized DKP steel, the rack is finished for indoor use, garage storage, covered patios, and outdoor fireplace zones. The elevated profile works well where bark, dust, and small wood fragments need to stay easier to manage. For more visual log-storage designs, see Decorative Firewood Racks.

Why It Works

• Elevated legs lift logs off the floor: Integrated leg base raises split logs 6 inches above the hearth — air circulates beneath the stack, reducing trapped moisture from cold concrete or tile floors that can affect newly seasoned logs.
• Easier hearth cleaning beneath the rack: Sweep or vacuum directly under the rack without moving it — the open space below clears bark, dust, and ash debris that normally accumulates around floor-flush racks.
• Three sizes scale with seasonal burn cycle: 40-inch fits a small living-room hearth; 60-inch handles regular winter use. Pick by ceiling clearance and typical log volume.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Three sizes (H × W × D): 40 × 18 × 10 in / 100 × 45 × 25 cm; 48 × 18 × 10 in / 120 × 45 × 25 cm; 60 × 18 × 10 in / 150 × 45 × 25 cm.
• Capacity: Standard fireplace-cut split logs raised off the floor on elevated legs; the largest size holds approximately 25-35 split logs
• Material: powder-coated galvanized DKP steel, vertical frame with elevated leg base
• Finish: Black
• Weight: From about 6 kg / 13.2 lb at the smallest size
• Mounting: Free-standing — no mounting hardware required; sits flat on the floor or hearth on a flat, level surface.
• Placement: Living room hearth, fireplace nook, family room, sunroom

What's Included

• Free-standing elevated black metal firewood rack (size as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Load the largest split logs at the bottom for a low center of gravity, then stack medium logs above for stability. Distribute weight evenly across the frame — avoid loading heavily on one side. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized DKP steel with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface — rinse off any salt-spray and wipe dry. The powder-coated galvanized DKP steel finish is rust-proof and weatherproof for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for fireplace-cut split logs 14 to 18 inches long. The 40-inch unit holds 15 to 22 logs; the 48-inch holds 18 to 28; the 60-inch holds 25 to 35 split logs depending on diameter. Distribute weight evenly across the elevated base.

How stable is it when fully loaded?
The wide footprint distributes weight across the base when placed on a flat, level floor. For stable balance, distribute logs evenly rather than stacking heavily on one side, and stack the largest splits at the bottom for a low center of gravity.

How tall are the legs and do they damage flooring?
The integrated legs lift the rack base approximately 6 inches above the floor with broad foot pads that distribute weight without point-loading. The Black powder-coat foot pads sit gently on hardwood, tile, or stone hearth surfaces. For protection on softer wood floors, consider felt pads under each foot.

How is the Black finish maintained?
Black powder-coat handles standard indoor humidity and log contact well. Wipe the frame with a soft, dry cloth or microfiber regularly to remove dust and bark fragments. For sticky resin spots from sappy logs, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive cleaners that can dull the finish.

How do I clean the firewood rack?
Wipe the powder-coated galvanized DKP steel with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page