The Metal Wall Mounted Firewood Holder is a wall-mounted log holder for fireplace walls, garages, cabins, and narrow hearth areas. Its slim mounted frame keeps split wood off the floor, leaving room below for walking space, tools, or cleaning around the fireplace.

Made from powder-coated galvanized DKP steel, the holder is rust-proof and weatherproof for indoor rooms, garages, covered patios, and outdoor fireplace areas. Because wall-mounted firewood storage depends on wall type and installation, follow the product-specific mounting guidance before loading the rack. For related mounted options, see Wall-Mounted Firewood Racks.

Why It Works

• Mesh-back panel keeps split logs contained: The handcrafted mesh back holds logs in place against the wall — no rolling, no shifting forward as you remove front logs. Useful for narrow rack widths where free-standing racks would lean.
• Slim 8-inch profile fits tight wall spaces: Sits close to the wall so logs project outward — useful in narrow apartments, hallway-style living rooms, and rentals where every inch of clearance matters.
• Four heights for different load volumes: 20-inch fits a small alcove above fireplace tools; 36-inch holds enough logs for several evening fires. Pick by available wall span and visible weight load.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Four sizes (H × W × D): 20 × 8 × 8 in / 50 × 20 × 20 cm; 24 × 8 × 8 in / 60 × 20 × 20 cm; 28 × 8 × 8 in / 70 × 20 × 20 cm; 36 × 8 × 8 in / 90 × 20 × 20 cm.
• Capacity: Standard fireplace-cut split logs in a slim wall column; the largest size accommodates approximately 12-15 split logs
• Material: powder-coated galvanized DKP steel with mesh-back panel for log retention
• Finish: Black
• Weight: From about 2 kg / 4.4 lb at the smallest size (rack only — loaded weight depends on logs)
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded log weight.
• Placement: Living room hearth wall, fireplace alcove, mudroom wall, family room

What's Included

• Wall-mounted metal firewood holder with mesh back (size as ordered, Black finish)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two upper mounting hole positions on the wall using a level — the rack ships with two integrated wall-mount keyholes at the back of the frame. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws via the back-mounted brackets. Install takes under 15 minutes with a basic drill.

Care

Wipe the powder-coated galvanized DKP steel with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor use next to the fireplace; for covered porch installations, rinse off any salt-spray and wipe dry. The powder-coated galvanized DKP steel finish is rust-proof and weatherproof for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for standard fireplace-cut split logs in the 12 to 16 inch length range. The smallest 20-inch unit holds approximately 4 to 6 split logs; the 28-inch holds around 8 to 10; the largest 36-inch holds approximately 12 to 15 split logs depending on log diameter. Stack vertically with the mesh-back panel containing the column.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded log weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Will it support a full load of split firewood on the wall?
The wall-mount brackets transfer load to the wall studs or anchors. Use heavy-duty anchors rated for the loaded log weight — a typical full load runs 25 to 50 pounds depending on size. Anchor into a wall stud where possible for stronger pull-out resistance, especially on the 36-inch size.

How is the mesh-back panel maintained?
Wipe the mesh-back panel with a soft, dry cloth or microfiber to remove dust and bark fragments lodged in the perforations. For sticky resin spots, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scrubbers that can damage the powder-coat finish on the mesh perforations.

How do I clean the firewood rack?
Wipe the powder-coated galvanized DKP steel with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page